Mylinking™ Network Packet Broker(NPB) ML-NPB-6400

4810GE SFP+ plus 440GE/100GE QSFP28, Max 880Gbps

Short Description:

Mylinking™ Network Packet Broker of ML-NPB-6400 adopts dedicated ASIC chip and NPS400 solution. The dedication ASIC chip can meet 48 * 10GE and 4 * 100GE ports of line speed data transceive and receive, up to 880Gbps flow processing capacity at the same time, to meet users’ requirements for centralized data capture and simple preprocessing of the whole network link. The built-in NPS400 can reach the maximum throughput of 200Gbps to reprocess, to meet users’ requirements for data processing in-depth.

Send email to us

Product Detail

Product Tags

1- Overviews

A full Network Visibility Control of Data Capture Device(48*1GE/10GE SFP+ and 4*40GE/100GE QSFP28 ports)
A full Data Scheduling Management device(Max 24*10GE, 2*100GE ports duplex Rx/Tx processing of traffic replication, aggregation and forwarding)
A full pre-processing and re-distribution device(bidirectional bandwidth 880Gbps)
Supported traffic capture of link data from different network element locations
Supported traffic capture of link data from different switch routing nodes
Supported raw packet captured, identified, analyzed, statistically summarized and marked
Supported raw packet output for monitoring equipment of BigData Analysis, Protocol Analysis, Signaling Analysis, Security Analysis, Risk Management and other required traffic.
Supported real-time packet capture analysis, data source identification, and real-time/historical network traffic search

2- Intelligent Traffic Processing Abilities

ASIC Chip Plus Multicore CPU
880Gbps intelligent traffic processing capabilities

10GE Acquisition
1GE/10GE 48 ports, Max 24*10GE ports Rx/Tx duplex processing, and 40GE/100GE up to 880Gbps Traffic Data Transceiver at same time, for network Data Capture, simple Pre-processing

Data Replication
Packet replicated from 1 port to multiple N ports, or multiple N ports aggregated, then replicated to multiple M ports

Data Aggregation
Packet replicated from 1 port to multiple N ports, or multiple N ports aggregated, then replicated to multiple M ports

Data Distribution/Forwarding
Classified the incoming metdata accurately and discarded or forwarded different data services to multiple interface outputs according to user’s predefined rules.

Data Filtering
Supported L2-L7 packet filtering matching, such as SMAC, DMAC, SIP, DIP, Sport, Dport, TTL, SYN, ACK, FIN, Ethernet type field and value, IP protocol number, TOS, etc. also supported flexible combination of up to 2000 filtering rules.

Load Balance
Supported load balance Hash algorithm and session-based weight sharing algorithm according to L2-L7 layer characteristics to ensure that the port output traffic dynamic of load balancing

UDF Match
Supported the matching of any key field in the first 128 bytes of a packet. Customized the Offset Value and Key Field Length and Content, and determining the traffic output policy according to the user configuration

VLAN Tagged

VLAN Untagged

VLAN Replaced

Supported the matching of any key field in the first 128 bytes of a packet. The user can customize the offset value and key field length and content, and determine the traffic output policy according to the user configuration.

Ports Healthy Detection
Supported real-time detection of the service process health of the back-end monitoring and analysis equipment connected to different output ports. When the service process fails, the faulty device is automatically removed. After the faulty device is recovered, the system automatically returns to the load balancing group to ensure the reliability of multi-port load balancing.

Time Stamping
Supported to synchronize the NTP server to correct the time and write the message into the packet in the form of a relative time tag with a timestamp mark at the end of the frame, with the accuracy of nanoseconds

VxLAN, VLAN, MPLS Untagged
Supported the VxLAN, VLAN, MPLS header in the original data packet is stripped and output.

Data De-duplication
Supported port-based or policy-level statistical granularity to compare multiple collection source data and repeats of same data packet at a specified time. Users can choose different packet identifiers (dst.ip, src.port, dst.port, tcp.seq, tcp.ack)

Data Slicing
Supported policy-based slicing (64-1518 bytes optional) of the raw data, and the traffic output policy can be implemented based on user configuration

Classified Data Hidden/Masking
Supported policy-based granularity to replace any key field in the raw data in order to achieve the purpose of shielding sensitive information. According to user configuration, the traffic output policy can be implemented.

Tunneling Protocol Identify
Supported automatically identify various tunneling protocols such as GTP / GRE / PPTP / L2TP / PPPOE. According to the user configuration, the traffic output strategy can be implemented according to the inner or outer layer of the tunnel

Packet Capturing
Supported port-level, policy-level packet capture from source physical ports within filter of Five-Tuple field in real time

Packet Analysis
Supported the captured datagram analysis, including abnormal datagram analysis, stream recombination, transmission path analysis, and abnormal stream analysis

Unified Control Platform
Supported mylinking™ Visibility Control Platform Access

1+1 Redundant Power System(RPS)
Supported 1+1 Dual Redundant Power System

3- Typical Application Structures

3.1 mylinking™ Network Packet Broker Centralized Traffic Capturing, Replication/Aggregation Application(as following)

3.2 mylinking™ Network Packet Broker Unified Schedule Application for Data Monitoring(as following)

Mylinking™ Network Packet Broker adopts dedicated ASIC chip and NPS400 solution. The dedication ASIC chip can meet 48 * 10GE and 4 * 100GE ports of line speed data transceive and receive, up to 880Gbps flow processing capacity at the same time, to meet users' requirements for centralized data capture and simple preprocessing of the whole network link. The built-in NPS400 can reach the maximum throughput of 200Gbps to reprocess, to meet users' requirements for data processing in-depth.

3.3 mylinking™ Network Packet Broker Data De-duplication Application(as following)

3.4 mylinking™ Network Packet Broker Data Slicing Application(as following)

3.5 mylinking™ Network Packet Broker Hybrid Access Application for Data Acquisition/Replication/Aggregation (as following)

4- Specifications

ML-NPB-6400 Mylinking™ Network Packet Broker NPB Functional Parameters
Network Interface		10GE SFP+ ports 100GE QSFP28 ports	48 * 10G SFP+ slots and 4 * 100G QSFP28 slots; Support 1GE/10GE/40G/100GE; Support for single and multi-mode fiber
Network Interface		Out of Band management interface	1* 10/100/1000M electrical interface
Deployment Mode		1GE/10GE/40GE/100GE fiber spectral capture	Supported
Deployment Mode		1GE/10GE/40GE/100GE Mirror span capture	Supported
System Functions	Basic Traffic Process	Traffic replication / aggregation / distribution	Supported
		Traffic Filtering based on IP / protocol / port seven tuple traffic identification	Supported
		VLAN Tag/Replace/Delete	Supported
		Ethernet encapsulation independence	Supported
		Traffic Processing Ability	880Gbps
	Intelligent Traffic Process	Time Stamping	Supported
		Packet Header Stripping	Supported VxLAN, VLAN, MPLS, GTP, GRE Header Stripping
		Packet De-duplication	Supported Packet De-duplication based on ports and rules
		Packet Slicing	Supported Packet Slicing based on rules
		Tunnel protocol identification	Supported
		Traffic Processing Ability	200Gbps
	Management	CONSOLE Network Management	Supported
		IP/WEB Network Management	Supported
		SNMP Network Management	Supported
		TELNET/SSH Network Management	Supported
		RADIUS or AAA Authorization certification	Supported
		SYSLOG Protocol	Supported
		User authentication function	Password authentication based on user name
Electric(1+1 Redundant Power System-RPS)		Rated supply voltage	AC-220V/DC-48V [Optional]
		Rated power frequency	AC-50HZ
		Rated input current	AC-3A / DC-10A
		Rated power function	Max 370W
Environment		Operating Temperature	0－50℃
		Storage Temperature	-20-70℃
		Operating Humidity	10%-95%, Non-condensing
User Configuration		Console Configuration	RS232 Interface, 115200, 8, N, 1
User Configuration		Password authentication	support
Rack Height		Rack space (U)	1U 445mm44mm402mm