Mylinking™ Network Packet Broker(NPB) ML-NPB-1610

16*10GE SFP+, Max 160Gbps

Short Description:

Mylinking™ Network Packet Broker of ML-NPB-1610 has up to 160Gbps processing capacity. Supports a maximum of 16 slots 10G SFP+ (compatible with Gigabit), flexibly supporting 10-gigabit single/multi-mode optical modules and 10-GIGABit electrical modules. Built-in powerful traffic policy identification engine can accurately customize the traffic type of each traffic collection and output interface to meet various network security. Traffic monitoring requirements such as protocol analysis and signaling protocol analysis.

Send email to us

Product Detail

Product Tags

1- Overviews

A full visual control of Data Acquisition device(16*10GE SFP+ ports)
A full Data Scheduling Management device(duplex Rx/Tx processing)
Adopts ASIC dedicated chip pure hardware design, high-speed backplane switching bus bandwidth up to 160Gbps
Supported collection & reception of link data from different network element locations
Supported full line rate traffic capture, replication, aggregation, filtering, shunting, copying and other functions
Supported raw packet collected, identified, analyzed, statistically summarized and marked
Supported flexible combination of elements traffic filtering such as ethernet type, vlan tag, vlan priority information, MAC address, IP quintuple, IPV6 information, IP fragmentation analysis, tcp flag, packet characteristics, port number, etc. Security equipment, protocol analysis, signaling analysis, and other traffic monitoring deployment requirements.
Supported flexible combination of elements based on ip quintuple, tunnel inner and outer information, ethernet type, vlan tag, MAC address, etc., and selection of multiple different HASH algorithms to further satisfy various network security devices, protocol analysis, and signaling analysis for traffic monitoring deployment requirements
Supported real-time packet capture analysis, data source identification

2- System Block Diagram

3- Operating Principle

4- Intelligent Traffic Processing Abilities

ASIC Chip Plus TCAM CPU
160Gbps intelligent traffic processing capabilities

10GE Acquisition
10GE 16 ports, Rx/Tx duplex processing, up to 160Gbps Traffic Data Transceiver at same time, for network Data Acquisition, simple Pre-processing

Data Replication
Packet replicated from 1 port to multiple N ports, or multiple N ports aggregated, then replicated to multiple M ports

Data Replication
Packet replicated from 1 port to multiple N ports, or multiple N ports aggregated, then replicated to multiple M ports

Data Distribution
Classified the incoming metdata accurately and discarded or forwarded different data services to multiple interface outputs according to user’s predefined rules.

Data Filtering
Supported L2-L7 packet filtering matching, such as SMAC, DMAC, SIP, DIP, Sport, Dport, TTL, SYN, ACK, FIN, Ethernet type field and value, IP protocol number, TOS, etc. also supported flexible combination of filtering rules.

Load Balance
Supported load balance Hash algorithm and session-based weight sharing algorithm according to L2-L7 layer characteristics to ensure that the port output traffic dynamic of load balancing

UDF Match
Supported the matching of any key field in the first 128 bytes of a packet. Customized the Offset Value and Key Field Length and Content, and determining the traffic output policy according to the user configuration

VLAN Tagged

VLAN Untagged

VLAN Replaced

Supported the matching of any key field in the first 128 bytes of a packet. The user can customize the offset value and key field length and content, and determine the traffic output policy according to the user configuration.

MAC Address Replacement
Supported the replacement of the destination MAC address in the original data packet, which can be implemented according to the user's configuration

3G/4G Mobile Protocol Recognition/Classification
Supported to identify mobile network elements such as (Gb, Gn, IuPS, S1-MME, S1-U, X2-U, S3, S4, S5, S6a, S11, etc. interface). You can implement traffic output policies based on features such as GTPV1-C, GTPV1-U, GTPV2-C, SCTP, and S1-AP based on user configurations.

Ports Healthy Detection
Supported real-time detection of the service process health of the back-end monitoring and analysis equipment connected to different output ports. When the service process fails, the faulty device is automatically removed. After the faulty device is recovered, the system automatically returns to the load balancing group to ensure the reliability of multi-port load balancing.

VLAN, MPLS Untagged
Supported the VLAN, MPLS header in the original data packet is stripped and output.

Tunneling Protocol Identify
Supported automatically identify various tunneling protocols such as GTP / GRE / PPTP / L2TP / PPPOE. According to the user configuration, the traffic output strategy can be implemented according to the inner or outer layer of the tunnel

Unified Control Platform
Supported mylinking™ Visibilityl Control Platform Access

1+1 Redundant Power System(RPS)
Supported 1+1 Dual Redundant Power System

5- Mylinking™ Network Packet Broker Typical Application Structures

5.1 Mylinking™ Network Packet Broker N*10GE to 10GE Data Aggregation Application(as following)

5.2 Mylinking™ Network Packet Broker GE/10GE Hybrid Access Application(as following)

6- Specifications

ML-NPB-1610 Mylinking™ Network Packet Broker TAP/NPB Functional Parameters
Network Interface	10GE	16*10GE/GE SFP+ slot; support single/multiple mode fiber
Network Interface	Out-of-Band MGT interface	1*10/100/1000M electrical port
Deploy mode	10G optical splitting	Support 8*10G bidirectional link traffic acquisition
	10G mirror acquisition	Support max to 16*10G mirror traffic inputting
	Optical inputting	Input port supports single fiber splitting input;
	Port multiplexing	Support input port as output port;
	Flow output	Support 16 channels of 10GE flow output;
	Traffic aggregating/replicating/distribution	Supported
	QTYs of links supporting traffic duplicating/aggregating	1->N way traffic replication (N<16) N->1 channel traffic aggregation (N<16) Group G (M->N way) grouped traffic replication aggregation [ G*(M+N) < 16 ]
	Port-based traffic identification diverting	Supported
	port five tuple traffic identification diverting	Supported
	Traffic identification divert strategy based on key tag of protocol header	Supported
	Ethernet encapsulation unrelated support	Supported
	CONSOLE MGT	Supported
	IP/WEB MGT	Supported
	SNMP MGT	Supported
	TELNET/SSH MGT	Supported
	SYSLOG protocol	Supported
	User authentication	Based on users’ password authentication
Electric(1+1 Redundant Power System-RPS)	Rate power supply voltage	AC110-240V/DC-48V(Optional)
	Rate power supply frequency	AC-50HZ
	Rate input current	AC-3A / DC-10A
	Rate power	140W/150W/150W
Environment	Working temperature	0－50℃
	Storage temperature	-20-70℃
	Working humidity	10%-95%, no condensation
User Configuration	Console configuration	RS232 interface, 9600,8,N,1
User Configuration	Password authentication	Supported
Height of Chassis	(U)	1U 445mm44mm402mm

7- Order Information

ML-NPB-0810 mylinking™ Network Packet Broker 8*10GE/GE SFP+ ports, max 80Gbps
ML-NPB-1610 mylinking™ Network Packet Broker 16*10GE/GE SFP+ ports, max 160Gbps
ML-NPB-2410 mylinking™ Network Packet Broker 24*10GE/GE SFP+ ports, max 240Gbps

Previous: Mylinking™ Network Packet Broker(NPB) ML-NPB-0810

Next: Mylinking™ Network Packet Broker(NPB) ML-NPB-2410

Network Broker